Pengendalian Kualitas Produk Kayu di CV. Berdikari Sukses dengan Menggunakan Metode Seven Quality Tools

Riskhi Aji Prastiyo, Akhmad Wasiur Rizqi, Muhammad Jufriyanto

Abstract


The objective of this research is to select a high-quality product for a successful self-released CV and reduce a non-high-quality product to a successful independent CV during the production process. Success is a company that works in the industry of building goods made of wood. Products made include wooden floors, wood for building materials, handrails, door frames, and floors with deck. There are seven major quality control tools that can be used to control quality. These include sheet checks, histograms, control charts, pareto diagrams, fishbone diagram, scatter diagrammes, and stratification. When a processed wood is rotated, there are three types of damage that can occur: monocular or perforated damage, damaged damage in the middle part, and hard damage. The biggest damage is border or hole damage, which accounts for 47.19 percent of the total damage. The inability of wood products to break. The total damage percentage is 13481, with an intermediate rupture of 30.55% and the lowest resistance result of 22.24%.


Keywords


manufacturing manner, quality, disability, seven tools

Full Text:

PDF

References


D. Irwati and D.I. Prasetya, “Mengurangi Cacat Color out Menggunakan Pendekatan Seven tools: Studi kasus industri Coloring Compound Plastic” J. Pelita Ind, Vol. 1, no. 1, pp. 16-21, 2020.

Purnawati, N. K. “Analisis Pengendalian Kualitas Produksi Pie Susu pada Perusahaan Pie susu Barong di Kota Denpasar”. E-Jurnal Manajemen Unud, Vol. No. 3, 1566-1594. 2018.

Ransun, K. M., Saerang, D. E., & Warongan, “J. D. Influence The Cost of Quality and Production Cost on Product Quality Improvement at Trinity Percetakan Manado”. Jurnal Berkala Ilmiah Efisiensi, 79-90. 2016.

Astuti, F., & Wahyudin, W. “Perbaikan Kualitas Produk Gentong Menggunakan Metode Seven Tools”. Jurnal Barometer, Vol. 6 No. 1, 307-312. 2021.

M. Rofieq and R. Septiari, “Penerapan Seven Tools Dalam Pengendalian Kualitas Botol Plastik Kemasan 60 Ml,” J. Ind. View, vol. 03, no. 1, pp. 23-34, 2021.

N. Hairiyah, R. R. Amalia, and E. Luliyanti, ”Analisis Statistical Quality Control (SQC) pada Produksi Roti di Aremania Bakery,” Ind. J. Teknol. Dan Manaj. Agroindustri, vol. 8, no. 1, pp. 41-48, 2019, doi: 10.21776/ub.industria.2019.008.01.5

I.Idris, R. A. Sari, Wulandari and W. U, “Pengendalian Kualitas Tempe Dengan Menggunakan Seven Tools,” Teknovasi, vol. 3, no. 1, pp. 66-80. 2016.

Ulkhaq, M. Mujiya, Susatyo NW Pramono, and Rifki Halim. "Aplikasi seven tools untuk mengurangi cacat produk pada Mesin Communite di PT. Masscom Graphy, Semarang." Penelitian dan Aplikasi Sistem dan Teknik Industri 11.3 (2017): 328346.

Somadi, B.S. Priambodo, and P. R. Okarini, “Evaluasi Kerusakan Barang Dalam Proses Pengiriman,”J. Intech Tek. Ind. Univ. Serang Raya, vol. 9, no. 1,pp. 1-11, 2020.

A. Merjani and I. Kamil, “Penerapan Metode Seven Tools dan PDCA (Plan Do Check Action), Untuk Mnegurangi Cacat Pengelasan Pipa,”J. Profiseiensi, vol. 9, no. 1, pp. 124-131, 2021.

R. Ratnadi and E. Supriyanto, “Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) Dalam Upaya Menekan Tingkat Kerusakan Produk, “J. Indept, vol. 6, no. 2, p. 11, 2016, [Online]. Available: https://jurnal.unnur.ac.id/index.php.indept/article/view/178/0.

A. M. Rani and W. Setiawam, “Menganalisis Defect Sanding Mark Unit Pick Up TMC Dengan Metode Seven Tools PT. ADM,” J. Integr. Sist. Ind, vol. 3, no. 1, 2016.

E. Haryanto, “Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin SNC Lathe Dengan Metode Seven Tools,” J. Tek., vol. 8, no. 1, 2019, doi: 10.31000/jt.v8il.1595

A Merjani and I. Kamil, “Penerapan Metode Seven Tools dan PDCA {Plam Do Check Action), Untuk Mengurangi Cacat Pengelasan Pipa,”J. Profisiensi, vol. 9, no, 1, pp. 124-131. 2021.

J. Elbert, “Pengendalian Kualitas menggunakan metode fmea {failure mode and effect analysis) di PT. Asia Mandiri,” Calyptra J. Ilm. Mhs. Univ Surabaya vol. 7, no. 2, pp. 2570-2583, 2019, [Online]. Available: https://journal.ubaya.ac.id/index.php/jimus/article/view/3525.




DOI: https://doi.org/10.32672/jse.v8i3.6541

Refbacks

  • There are currently no refbacks.