Redesign of Hazardous and Toxic Waste Temporary Storage at PT ABC

Reni Dwi Septiani, Temmy Wikaningrum

Abstract


PT ABC is an industry that produces hazardous and toxic waste. All waste generated is stored in temporary storage, but based on observations made, the existing temporary storage does not meet the standards set by the government. Therefore, a temporary storage area was redesigned at PT ABC in accordance with the standards set by the government. The objective of this study is to find a temporary storage place that complies with government regulations for PT ABC. The method used is to record the types, characteristics, and quantities produced by PT ABC, followed by existing observation, then proceed with the calculation of facility requirements according to SNI and individual calculations. A redesign is carried out by adjusting the calculation results, determining the required facilities, and making a design proposal. The results showed that PT ABC requires temporary storage of 6,1 m x 2,6 m x 4,4 m to accommodate all the waste generated for 3 months with the number of drums needed, namely 5 drums. The total ventilation needed is 6 pieces with a size of 0.5 m x 0.5 m. The required size of the spill container is 2.2 m x 1.2 m x 0.6 m, and it takes 3 lamps to illuminate the temporary storage.


Keywords


hazardous and toxic waste, temporary storage, redesign, environmental management, Indonesian government regulations.

Full Text:

PDF

References


F. A. Y. Satria, “Perancangan Tempat Penyimpanan Sementara (TPS) Limbah Bahan Berbahaya Beracun (B3) pada PT Semen Indonesia Beton,” Thesis (Undergraduate), Universitas Internasional

Semen Indonesia., 2017.

S. Setiyono, “Dasar Hukum Pengelolaan Limbah B3,” Jurnal Teknologi Lingkungan, vol. 2, no. 1, 2001.

S. A. Fajriyah and E. Wardhani, “Evaluasi Pengelolaan Limbah Bahan Berbahaya dan Beracun (B3) di PT. X,” Jurnal Serambi Engineering, vol. 5, no. 1, 2020.

M. Nasir, E. P. Saputro, and S. Handayani, “Manajemen pengelolaan limbah industri,” Benefit: Jurnal Manajemen dan Bisnis, vol. 19, no. 2, pp. 143–149, 2016.

A. Maulida, A. Oktaviani, H. S. Pakpahan, and T. Wikaningrum, “Hazardous Waste Should Be Managed Properly for Development of Better Waste Management Strategies,” Jurnal Penelitian dan Karya Ilmiah Lembaga Penelitian Universitas Trisakti, vol. 7, no. 2, pp. 193–209, 2022, doi: 10.25105/pdk.v7i2.12815.

Republik Indonesia. 2021. Peraturan Pemerintah Nomor 22 Tahun 2021 tentang Penyelenggaraan Perlindungan dan Pengelolaan Lingkungan Hidup. Jakarta, 2021.

Kementerian Lingkungan Hidup dan Kehutanan. 2021. Peraturan Menteri Lingkungan Hidup dan Kehutanan No. 6 Tahun 2021 tentang Tata Cara dan Persyaratan Pengelolaan Limbah Bahan Berbahaya dan Beracun. Jakarta, 2021.

R. Wisdayana, F. S. P. Pangesti, and A. Ariesmayana, “Redesain Tempat Penyimpanan Sementara Limbah B3 di Workshop PT. Purna Baja Harsco,” Jurnal Serambi Engineering, vol. 7, no. 2, 2022.

H. Kusdiantoro, U. P. A. Astuti, and M. R. Dhani, “Redesain Tempat Penyimpanan Sementara (TPS) Limbah B3 di Perusahaan Kapal,” in Seminar K3, 2017, vol. 1, no. 1, pp. 194–198. 2017.

Q. Qanytah, “Standarisasi Pallet (Alas Kemasan) Produk Pertanian,” Jurnal Standardisasi, vol. 10, no. 3, pp. 129–135, 2008.

B. S. N. Indonesia and B. S. Nasional, “SNI 03-6575-2001 tentang Tata Cara Perancangan Sistem Pencahayaan Buatan pada Bangunan Gedung,” Badan Standarisasi Nasional, pp. 1–32, 2001.

G. Hardiman, “Pengaruh Luas Bukaan Terhadap Kebutuhan Pertukaran Udara Bersih Dalam Rumah Tinggal,” Modul, vol. 14, no. 2, pp. 79–86, Nov.2014.

B. S. Nasional, “Standar Nasional Indonesia (Indonesian National Standardization)-SNI 03-6572: 2001 Tata Cara Perancangan Sistem Ventilasi dan Pengkondisian Udara pada Bangunan Gedung,” BSN. Jakarta: Indonesia, 2001.

I. W. Murti and A. H. Ibrahim, “Identifikasi Bahaya dan Perancangan Tempat Penyimpanan Sementara (TPS) Limbah B3 Proses Sandblasting di PT Swadaya Graha,” Energy-Jurnal Ilmiah Ilmu-Ilmu Teknik, vol. 8, no. 1, pp. 1–7, 2018.

Kementerian Ketenagakerjaan, 1980. Syarat-Syarat Pemasangan dan Pemeliharaan Alat Pemadam Api Ringan. Jakarta, 1980.




DOI: https://doi.org/10.32672/jse.v8i2.6031

Refbacks

  • There are currently no refbacks.


Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.

 

 

RJI Main logo

Bekerjasama dengan Native Proofreading