Pemilihan Metode Peramalan yang Tepat Untuk Meramalkan Permintaan Piston Cup Forging di Perusahaan Spare-part Kendaraan

Theodora Edita Sari, Winarno Winarno

Abstract


The demand for Piston Cup Forging in spare-part companies every period has increased and decreased, which causes uncertainty about product demand. In this case, the company needs to do demand forecasting. There are various methods of doing forecasting. Companies must choose the best forecasting method, so that companies can make decisions more effectively and efficiently. This research aims to compare the best forecasting methods to apply for companies. The methods that will be compared in this research are Moving Average 3 monthly and 5 monthly, and Exponential Smoothing with α = 0,1; α = 0,5; and α = 0,9. The error accuracy calculations used are Mean Absolute Deviation (MAD), Mean Squared Error (MSE), and Mean Absolute Percentage Error (MAPE). From the results of calculations and analysis, the method that has the lowest error rate is the Exponential Smoothing method with α = 0,1, with MAD of 16.695, MSE of 510.645.732, and MAPE value of 61%. So in estimating the demand for Piston Cup Forging over the upcoming period in spare-part companies can use the Exponential Smoothing method with α = 0,1.


Keywords


Error accuracy, exponential smoothing, moving average, forecasting, demand

Full Text:

PDF

References


M. Ngantung and A. H. Jan, “Analisis Peramalan Permintaan Obat Antibiotik Pada Apotik Edelweis Tatelu,” J. EMBA, vol. 7, no. 4, pp. 4859–4867, 2019.

S. P. Khan, S. M. Ayuningtyas, W. Rohmah, Z. Indah, and A. G. Azzahra, “Analisa Perbandingan Nilai Akurasi Exponential Smoothing dan Linier Regresion pada Peramalan Permintaan Part Joint Brake Rod,” J. Serambi Eng., vol. VIII, no. 1, pp. 4251–4260, 2023.

Sylvia, “Implementasi dan Analisa Metode Peramalan Exponential Smoothing dan Weighted Moving Average Untuk Permintaan Produk Minuman Kopi K di CV Fajar Timur Lestari,” J. Ind. Eng. Manag. Res., vol. 3, no. 4, pp. 139–147, 2017.

H. Qurrota, H. Ardian, and M. K. Nunuh, “Pemilihan Metode Peramalan Jumlah Permintaan Koran dengan Tingkat Kesalahan Terendah,” J. Manaj. Tek. Ind. – Produksi, vol. XXI, no. 2, pp. 91–100, 2021, doi: 10.350587/Matrik.

D. R. Kania, S. P. Lestari, and B. Barlian, “Penerapan Metode Peramalan Moving Average dan Exponential Smoothing untuk Menyusun Perencanaan Produksi ( Survei pada UMKM Pembuatan Bordir dan Pakaian , Nining Collection di Ciamis ),” J. Ilm. Multidisiplin, vol. 1, no. 10, pp. 3609–3622, 2022.

E. Andrianto, F. S. Wahyuni, and R. P. Prasetya, “Aplikasi Sistem Peramalan Ketersediaan Stok Barang Di Toko Mebel Abadi Jaya Menggunakan Metode Single Moving Average Dan Exponential Smoothing,” J. Mhs. Tek. Inform., vol. 6, no. 1, pp. 336–341, 2022.

N. Luh, W. Sri, R. Ginantra, I. Bagus, and G. Anandita, “Penerapan Metode Single Exponential Smoothing Dalam Peramalan Penjualan Barang,” J. Sains Komput. Inform., vol. 3, no. September, pp. 433–441, 2019.

I. Ardiansah, I. F. Adiarsa, S. H. Putri, and T. Pujianto, “Penerapan Analisis Runtun Waktu pada Peramalan Penjualan Produk Organik menggunakan Metode Moving Average dan Exponential Smoothing,” J. Tek. Pertan. Lampung, vol. 10, no. 4, pp. 548–559, 2021.

M. Latif and R. Herdiansyah, “Peramalan Persediaan Barang Menggunakan Metode Weighted Moving Average dan Metode Double Exponential Smoothing,” J. Inf. Syst. Res., vol. 3, no. 2, pp. 137–142, 2022, doi: 10.47065/josh.v3i2.1232.

D. Dardanella, A. P. Hidayat, S. H. Santosa, and R. Siskandar, “Peramalan Harga Jual Cabai Merah Di Pasar Rakyat Kemang Perusahaan Umum Daerah Pasar Tohaga Kabupaten Bogor,” Indones. J. Sci., vol. 3, no. 1, pp. 16–23, 2022.

H. Fransiska, “Peramalan Pertumbuhan Ekonomi Provinsi Bengkulu Menggunakan Single Moving Average, Single Exponential Smoothing, Dan Ensemble,” Teorema Teor. dan Ris. Mat., vol. 7, no. 1, pp. 161–170, 2022.

N. Hudaningsih, S. F. Utami, and W. A. A. Jabbar, “Perbandingan Peramalan Penjualan Produk Aknil PT . Sunthi Sepuri menggunakan Metode Single Moving Average Dan Single Exponential Smooting,” J. JINTEKS, vol. 2, no. 1, pp. 15–22, 2020.

J. A. Danil and Sukanta, “Penerapan Metode Moving Average dan Exponential Smoothing pada Peramalan Produksi di PT. Mada Wikri Tunggal,” J. Ilm. Wahana Pendidik., vol. 8, no. 7, pp. 37–40, 2022, doi: 10.5281/zenodo.6530222.

F. R. Nugraha and W. Winarno, “Peramalan Jumlah Permintaan Fuji Seat Dengan Metode Moving Average Dan Double Exponential Smoothing Di PT. Tri Jaya Teknik Karawang,” J. Teknol. Proses Dan Inov. Ind., vol. 6, no. 1, pp. 24–29, 2021.

M. Fitriana, D. Sudarwardi, and Nurlaela, “Penerapan Metode Single Moving Average Dan Exsponential Smoothing Pada Usaha Asrie Modesta,” Cakrawala Manag. Bus. J., vol. 3, no. 1, pp. 547–561, 2020.

F. A. Widjajati, Soehardjoepri, and E. Fani, “Menentukan Penjualan Produk Terbaik Di Perusahaan X Dengan Metode Winter Eksponensial Smoothing Dan Metode Event Based,” J. Math. Its Appl., vol. 14, no. 1, pp. 25–35, 2017.

Z. I. Vindari, W. Wahyudin, A. G. Azzahra, S. P. Khan, and S. M. Ayuningtyas, “Analisis Peramalan Permintaan pada Part Arm Rear Brake KWBF di PT Ciptaunggul Karya Abadi,” J. Serambi Eng., vol. VIII, no. 1, pp. 4284–4293, 2023.




DOI: https://doi.org/10.32672/jse.v8i2.5916

Refbacks

  • There are currently no refbacks.


Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.

 

 

RJI Main logo

Bekerjasama dengan Native Proofreading