Upaya Perbaikan Kualitas pada Proses Pengemasan Kedelai di PT Sari Agrotama Persada Gresik Menggunakan Metode Failure Mode and Effect Analysis
Abstract
PT Sari Agrotama Persada Gresik is an agribusiness company, and has been operating in Gresik since 2018 on soybean packaging, based on data from the company, where it is still found in their products, both from customer complaints and during the production process. Which is more directed at product packaging, it causes the quality required by the company, and product appearance has a big role in customer interest and trust. This study aims to determine the type, causative factors and recommendations for recommendations. In this study using Pareto diagrams to describe the level of product type, fishbone diagrams to find the factors of occurrence and FMEA (Failure Mode and Effect Analysis) methods to identify failure modes, determine failure effects and causes, assign severity, occurrence and detection values, calculating the Risk Priority Number (RPN). To do to find out the dominant factors causing the defect and provide an offer, then in the hope that it can be a consideration for companies to reduce or even eliminate their products, to produce products that comply with company standards.
Keywords
Full Text:
PDFReferences
A. Puspasari, D. Mustomi, and E. Anggraeni, “Proses Pengendalian Kualitas Produk Reject Dalam Kualitas Kontrol Pada PT Yasufuku Indonesia Bekasi,” Widya Cipta, Vol. 3, No. 1, Hal. 71–78, 2019.
I. G. A. A. H. Sari dan G. M. Sudiartha, “Pengendalian Kualitas Proses Produksi Kopi Arabika Pada Ud. Cipta Lestari Di Desa Pujungan,” E-Jurnal Manajemen, Vol. 8, No. 4, Hal. 2495–2523, 2019.
A. I. Oktaviani, “Upaya Perbaikan Kualitas Proses Pengemasan Pupuk Urea 1A di Bagian Rendal Produksi dengan Pendekatan Quality Improvement (Studi Kasus: PT Pupuk Kujang Cikampek),” Doctoral dissertation, Universitas Pasundan, 2019.
E. Krisnaningsih, P. Gautama, and M. F. K. Syams, “Usulan Perbaikan Kualitas Dengan Menggunakan Metode FTA dan FMEA,” Jurnal Intent: Jurnal Industri Dan Teknologi Terpadu, Vol. 4, No. 1, Hal. 41-54, 2021.
M. S. H. Elmas, “Pengendalian Kualitas Dengan Menggunakan Metode Statistical Quality Control (SQC) Untuk Meminimumkan Produk Gagal Pada Toko Roti Barokah Bakery,” J. Penelitian Ilmu Ekonomi WIGA, Vol. 7, No. 1, Hal. 15-22, 2017.
Mahmud. (2018). Analisa Pengendalian Kualitas Dengan Menggunakan Metode Fmea (Failure Mode And Effect Analysis) Pada Produk Front Fender 1pa Di Pt. Takagi Sari Multi Utama. In Universitas
Mercu Buana. Universitas Mercu Buana.
R. Y. Hanif, H. S. Rukmi, and S. Susanty, “Perbaikan Kualitas Produk Keraton Luxury Di PT. X Dengan Menggunakan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA),” Reka Integra, Vol. 3, No. 3, Hal. 137–147, 2015.
L. Octavia, “Aplikasi Metode Failure Mode and Effects Analysis (FMEA) untuk Pengendalian Kualitas pada Proses Heat Treatment PT. Mitsuba Indonesia,” Doctoral dissertation, Universitas Mercu Buana, 2010.
A. Syukron and M. Kholil, Six Sigma (Quality for Business Improvement) (Pertama). Yogyakarta: Graha Ilmu, 2013.
B. Septiana and B. Purwanggono, “Analisis Pengendalian Kualitas Dengan Menggunakan Failure Mode Error Analysis (FMEA) Pada Divisi Sewing PT Pisma Garment Indo,” Industrial Engineering Online Journal, Vol. 7, No. 3, Hal. 1–7, 2018.
N. U. Handayani, D. P. Sari, Midiawati, and H. Muhardiansyah, “Analisis Resiko Produksi Pakan Ternak Ayam Pedaging Pada CV. Eka Farma Semarang Menggunakan Failure Mode And Effect Analysis,” in Seminar Nasional Ienaco, Hal. 489–498, 2017.
A. Paisal and B. J. Cahyana, “Analisis Penyebab Cacat Menggunakan Metode Failure Mode Effect and Analysis (FMEA) Pada Produk Dark Compound Dengan Pendekatan Metode Kaizen Untuk Memperbaiki Sistem Produksi Studi Kasus PT. XYZ,” Prosiding Snitt-Politeknik Negeri Balikpapan, Vol. 4, Hal. 328–336, 2020.
E. Sumarya, “Pengendalian Kualitas Produk pada Proses Produksi Air Minum dalam Kemasan Botol 600ml dengan Metode Failure Mode Effect Analysis (FMEA) di PT. LMN Batam,” PROFISIENSI: Jurnal Program Studi Teknik Industri, Vol. 9, No. 1, Hal.178-187, 2021.
R. Ardyansyah, “Analisis Penyebab Cacat Produk Menggunakan Metode Failure Mode and Effect Analysis (FMEA) pada PT. Sinar Sanata Electronic Industry,” Doctoral dissertation, Universitas Medan Area, 2019.
R. Budiarto, “Penerapan Metode FMEA Untuk Keamanan Sistem Informasi (Studi Kasus: Website Polri),” in Seminar Nasional IPTEK Terapan (SENIT), Vol. 2, No. 1, Hal. 15-17, 2017.
DOI: https://doi.org/10.32672/jse.v7i3.4652
Refbacks
- There are currently no refbacks.
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.
Bekerjasama dengan Native Proofreading
