Pemetaan Risiko Pekerja Konstruksi Berbasis Metode Job Safety Analysis Di PT BBB

Ali Zainal Abidin, Nina Aini Mahbubah

Abstract


The growing rapid infrastructure jobs have been acknowledged in line with rapid development of instfrastructure project in this nation. PT BBB is a prominent construction enterprise with specialize in both corporate and government project. As such project profoundly depend on human worker, a number of accident occurred which caused delay to finish scheduled task. This study aim to mapping degree of accident risk in order to mitigate risk likelihood. Job Safety Analysis is used as research approach. This research begun in determining working activities breakdown, followed by describing and  identifing hazards in each working activity, and finally propose a mitigating scenario in order to eliminate work accidents. The results showed that there were 208 accidents. Those accidents have been calculated from seven working activities breakdown. Furthermore, it is  found 22 potential hazards with likelihood risk as follow :  4 potential hazards is consideredaas low level risk, 8 potential hazards is determined in  moderate level risk, 6 potential hazard is classified in high level risk and finally 4 potential hazards is considered as extreme level risk.


Keywords


work accident, hazard, JSA, risk level, construction

Full Text:

PDF

References


Tegar Bramasto and Intan Zainafree, "Penggunaan Job Safety Analysis Dalam Identifikasi Risisko Kecelakaan Kerja Di Bagian Workshop PT. Total Dwi Daya Kota Semarang," Unnes Journal Of Public Health, Vol. 4, No. 4, pp. 94-106, 2015.

Nova Rosdiana, Shanti Kirana Anggraeni, and Ani Umyati, "Identifikasi Risiko Kecelakaan Kerja Pada Area Produksi Proyek Jembatan Dengan Metode Job Safety Analysis (JSA)," Jurnal Teknik Industri, Vol. 5, No. 1, pp. 1-6, 2017.

Jeferson Bawang, Paul A. T. Kawatu, and Ribka Wowor, "Analisis Potensi Bahaya Dengan Menggunakan Metode Job Safety Analysis Di Bagian Pengapalan Site Pakal PT. Aneka Tambang Tbk. UBPN Maluku Utara," Jurnal KESMAS, Vol. 7, No. 5, 2018.

Isdiyati , Endang Suhendra, and Nana Suyana, "Analisis Keselamata Kerja Menggunakan Metode Hazard Identification Risk Assesment Dengan Pendekatan Spar-H Pada Pt. Argha Perdana Kencana," Jurnal Ilmiah Teknik Industri, Vol. 9, No. 1, pp. 1-9, 2021.

Meilan Agustin, "Identifikasi Bahaya Keselamatan Dan Kesehatan Kerja Serta Upaya Pengendalian Pada Proses Pengelasan Di Workshop," Jurnal KaLIBRASI - Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri, Vol. 8, No. 1, pp. 14-23, 2013.

Moch Nur Amirudin, Priyo Agus Setiawan, and Haidar Natsir Amrullah, "Identifikasi Bahaya Kegiatan Maintenance Perusahaan Bioethanol Pada Unit Mekanik Dengan Metode JSA," in Proceeding 2nd Conference on Safety Engineering and Its Application, Vol. 2, S, pp. 809-814, 2018.

Alfina Fitri Damayanti and Nina Aini Mahbubah, "Implementasi Metode Hazard Identification Risk Assessment and Risk Control Guna Peningkatan Keselamatan dan Kesehatan Karyawan Di PT ABC," Jurnal Serambi Enginering, Vol. VI, No. 2, pp. 1694-1701, 2021.

18001:2007 OHSAS, Occupational Health And Safety Assessment Series - Guideline For The., 1999.

Yahdi Ilmansyah, Nina Aini Mahbubah, and Dzakiyah Widyaningrum, "Penerapan Job Safety Analysis Sebagai Upaya Pencegahan Kecelakaan Kerja Dan Perbaikan Keselamatan Kerja Di PT. Shell Indonesia," Jurnal Proficiensi, Vol. 8, No. 1, pp. 15-22, 2020.

Dewi Wulandari and Noeroel Widajati, "Risk Assessment Pada Pekerja Pengelasan Perkapalan Dengan Pendekatan Job Safety Analysis," The Indonesian Journal of Occupational Safety and Health, Vol. 6, No. 1, pp. 1-15, 2017.

Paulus Sukapto, Harjoto Djojosubroto, and Handy Permana, "Penerapan Metode Job Safety Analysis and Risk Score untuk Meningkatkan Keselamatan dan Kesehatan Kerja pada Departemen Printing, Sewing dan Assembly PT. PAI, Bandung (Suatu Pendekatan Participatory Ergonomic)," Jurnal Kesehatan, vol. 9, No. 3, pp. 403-411, 2018.

Nurkholis and Gusti Adriansyah, "Pengendalian Bahaya Kerja Dengan Metode Job Safety Analysis PdaPenerimaan Afval Lokal Bagian Warehouse Di PT. ST," Teknika : Engineering and Sains Journal, Vol. 1, No. 1, pp. 11-16, 2017.

Maulana Arif Umaindra and Singgih Saptadi, "Identifikasi Dan Analisis Risiko Kecelakaan Kerja Dengan Metode JSA (Job Safety Analysis) Di Departemen Smoothmill PT Ebako Nusantara," Industrial Engineering Online Journal, Vol. 7, No. 1, 2018.

Monalisa F. Sumampouw, Diana V. Doda, and Effendi P. Sitanggang, "Analisis Potensi Bahaya Dan Tingkat Risiko Dengan menggunakan Metode Job Safety Analysis (JSA) Pada Bagian Produksi Salah Satu Industri Tepung Kelapa," Journal Paradigma Sehat, Vol. 5, No. 3, pp. 59-74, 2017.

Standards Australia License/New Zealand Standard, AZ/NZS 4360:1999 Risk Management. Brisbane: Standards Association of Australia, PO Box 1055, Strathfield NSW 2135, 1999.

Al Asyhar Wahyu Azady, Evi Widowati, and Sri Ratna Rahayu, "Penggunaan Job Hazard Analysis dalam Identifikasi Risiko Keselamatan Kerja pada Pengrajin Logam," Higeia Journal Of Public Health Research And Development, Vol. 2, No. 4, pp. 510-519, 2018.

Rani Aulia Imran, "Identifikasi Hazard Pada Proses Produksi Billet pada Area Tungku Peleburan Dengan Metode Hirarc (Studi Kasus PT XYZ)," Jurnal Ilmiah Teknik Industri, Vol. 8, No. 3, pp. 153-160, 2020.

Pandu Martino, Dyah Ika Rinawati, and Rani Rumita, "Analisis Identifikasi Bahaya Kecelakaan Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (HIRARC) di PT. Charoen Pokphand Indonesia- Semarang," Industrial Engineering Online Journal, Vol. 4, No. 2, 2018.




DOI: https://doi.org/10.32672/jse.v6i3.3124

Refbacks

  • There are currently no refbacks.


Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.

 

 

RJI Main logo

Bekerjasama dengan Native Proofreading