Analisis Kualitas FAME Menggunakan Metode Seven Tools dan FMEA Pada Departemen Laboratorium (Studi Kasus: PT. XYZ)

Sayyid Atho' Muzakki, Said Salim Dahda

Abstract


PT. XYZ is an industry that processes palm oil into oil to manufacture Fatty Acid Methyl Ester. Fatty Acid Methyl Ester (FAME) or commonly known as Biodiesel. This study aims to identify and analyze the factors that cause FAME products not to comply with standard specifications which can then be given proposals for improvement and resolution related to product quality defects. The incidence of defects that exceed the quality specification limit for FAME in moisture content parameters is 30.83%, soap content 3.33%, total glycerol 5% for 1 month. The solution method used uses seven tools and FMEA. With the use of the seven tools method, it is known that defective quality parameters are still within reasonable thresholds, and some of the factors that influence them are people, machines, methods, and raw materials. From the FMEA method, it is known that the material that must be repaired first with a value of RPN 320.


Keywords


fatty acid methyl ester, quality control, seven tools, failure mode and effect analysis

Full Text:

PDF

References


Minarsih, M. M. (2011). Kebijakan Ekonomi Indonesia dan Internasional Serta Tantangannya di Era Globalisasi. Dinamika Sains, 9(20).

Fonna, N. (2019). Pengembangan revolusi industri 4.0 dalam berbagai bidang. Guepedia.

Julyanthry, J., Siagian, V., Asmeati, A., Hasibuan, A., Simanullang, R., Pandarangga, A. P., ... & Syukriah M, E. A. (2020). Manajemen Produksi dan Operasi.

Ahmad, F. (2019). Six sigma dmaic sebagai metode pengendalian kualitas produk kursi pada ukm. JISI: Jurnal Integrasi Sistem Industri, 6(1), 11-17.

ISO 9004:2000, Quality Management System-Guidelines for Performance Improvements.

Prihastono, E., & Amirudin, H. (2017). Pengendalian Kualitas Sewing di PT. Bina Busana Internusa III Semarang. Dinamika Teknik Industri.

Dewi, M. H. H. (2019). Analisa dampak globalisasi terhadap perdagangan internasional. Ekonomia, 9(1), 48-57.

Afnina, A., & Hastuti, Y. (2018). Pengaruh Kualitas Produk terhadap Kepuasan Pelanggan. Jurnal Samudra Ekonomi Dan Bisnis, 9(1), 21-30.

Halim, N. R., & Iskandar, D. A. (2019). Pengaruh kualitas produk, harga dan persaingan terhadap minat beli. Jurnal Riset Manajemen dan Bisnis (JRMB) Fakultas Ekonomi UNIAT, 4(3), 415-424.

Herlina, E., Prabowo, F. H. E., & Nuraida, D. (2021). Analisis Pengendalian Mutu dalam Meningkatkan Proses Produksi. Jurnal Fokus Manajemen Bisnis, 11(2), 173-188.

Assauri, S. (2004). Manajemen Produksi dan Operasi. Edisi Revisi. Lembaga Penerbit FE-UI, Jakarta.

Munjiati, Munawaroh (2015). Manajemen Operasi. Yogyakarta: LP3M

Pratama, F. S., & Suhartini, S. (2019). Analisis Kecacatan Produk Dengan Metode Seven Tools Dan Fta Dengan Mempertimbangkan Nilai Risiko Dengan Metode Fmea. Jurnal Senopati: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 1(1), 43-51.

Hairiyah, N., Amalia, R. R., & Nuryati, N. (2020). Pengendalian Kualitas Amplang Menggunakan Seven Tools Di Ud. Kelompok Melati. Agrointek

Chrysler, LLC. (2008). Potential Failure Mode And Effect Analysis (FMEA): Fourth Edition. Ford Motor Company. General Motors Corporation.

Fitriani, Y. M., Andesta, D., & Hidayat, H. (2022). Analisis Risiko Kerusakan Pada Mesin Las FCAW Dengan Pendekatan Metode Failure Mode And Effect Analysis (Studi Kasus: PT. Swadaya Graha). Jurnal Serambi Engineering, 7(4).




DOI: https://doi.org/10.32672/jse.v8i4.6795

Refbacks

  • There are currently no refbacks.