Noise Level of Factory Area Department IB PT Petrokimia Gresik Using Noise Mapping Method and Niosh

Surya Rizki Ramadhani, Dzakiyah Widyaningrum

Abstract


Noise is a problem in the industrial sector, this resulted in many cases of hearing loss due to noise in industrial areas. PT Petrokimia Gresik has implemented noise control and started implementing several elements/components of the Hearing Conservation Program (HCP)/Hearing Conservation Program (PKP) to control noise. However, the PKP special program has not been implemented systematically, only a few elements/components have been implemented. The research objective was to determine the mapping and noise level in the factory area in the IB department of PT Petrokimia Gresik using the Noise Mapping and Niosh methods. Based on the results of measurements in the field, there are 11 highest noise points which are above the noise level quality standard of Regulation Number Per.13/Men/X/2011 before control is carried out. The highest noise point is 106 dB at point 10. Based on noise level measurements, the length of exposure recommended by NIOSH varies, and depends on the measurement results obtained the longest exposure time allowed at point 10 is 34.2 minutes. This measurement point is closest to the noise source, so workers are required to use PPE in the form of ear plugs, ear muffs and safety hats. The PPE can reduce the amount of acoustic energy on the hearing mechanism of workers at PT Petrokimia Gresik.


Keywords


noise, factory area, noise mapping, niosh

Full Text:

PDF

References


C. P. Septianingsih, O. Et, L. I. Palandeng, And O. C. P. Pelealu, “Pengaruh Kebisingan Terhadap Ambang Pendengaran Karyawan Arena Bermain,”Medical Scope Journal, Vol. 1, No. 2, Pp. 50–55, 2020.

P. A. Cakranegara. “Analisa Perbandingan Rasio Antar Industri,” Journal Of Innovation Research And Knowledge, Vol. 2, No 4, 2022.

Sumardiyono, R. Wijayanti And Hartono, “Noise Industrial Pollution: Health Vulnerabilities On Textile Industry Workers,” Jurnal Kesehatan Lingkungan, Vol. 11, No. 4, 2019.

D. Tanggasari, “Analisis Pengaruh Lingkungan Kerja (Kebisingan Dan Suhu) Terhadap Kinerja Karyawan Di PT. Santosa Utama Lestari Cabang Bima,” Food And Agro-Industry Journal, Vol. 2, No. 2, Pp. 1–7, 2021.

N. A. Silviana, N. Siregar, And M. Banjarnahor, “Pengukuran Dan Pemetaan Tingkat Kebisingan Padad Area Produksi,” Journal Of Industrial And Manufacturing Engineering, Vol. 5, No 2, November, Pp. 161–166, 2021.

M. P. Tasyania, R. Fariza, And D. K. Sari, “Analisis Lingkungan Kerja Fisik : Suhu Dan Kebisingan Terhadap Produktivitas Pada Ruang Mesin 2 PT Abc,” Jurnal Teknik Industri, Vol. 12, No. 2, Pp. 111–116, 2022.

Saefudin, D. Emra, “Usulan Pengendalian Bahaya Kebisingan Area Sub Assy Siren Di PT. Sumber Mas Autorindo,” Jurnal Keilmuan Teknik Mesin Dan Teknik Industri, Vol. 03, No. 1, Pp. 38–46, 2021.

A. Sasmita And S. Elystia, “Evaluasi Tingkat Kebisingan Sebagai Upaya Pengelolaan Kesehatan Dan Keselamatan Kerja ( K3 ) Di Unit PLTD / G Teluk Lembu PT PLN Pekanbaru,” Jurnal Sains Dan Teknologi, Vol. 15, No. September, Pp. 34–42, 2016.

V. Isliko, N. Budiharti, And E. Adriantantri, “Analisis Kebisingan Peralatan Pabrik Dalam Upaya Dan Meningkatkan Kinerja Karyawan Di PT . Wangi Indah Natural,” Jurnal Valtech, Vol. 5, No. 1, Pp. 101–106, 2022.

A. Sasmita And B. Osmeiri, “Pemetaan Tingkat Kebisingan Dan Analisis Waktu Pemaparan Maksimum Pada Industri Pengolahan Karet,” Jurnal Of Industrial Hygiene And Occupational Health, Vol. 6, No. 1, Pp. 35–48, 2021.

Arikunto Suharsimi, “Prosedur Penelitian Suatu Pendekatan Praktik,” Jakarta: Rineka Cipta, 2006.

W. J. P. Casas, E. P. Cordeiro, T. C. Mello, And P. H. T. Zannin, “Noise Mapping As A Tool For Controlling Industrial Noise Pollution,” Journal Of Scientific & Industrial Research, Vol. 73, No. 4, April, Pp. 262–266, 2014.

D. R. Anggraini, Y. Fitrianingsih, And A. Akbar, “Analisis Tingkat Kebisingan Dan Persebarannya Menggunakan Metode Noise Mapping Pada PLTD Siantan, Kalimantan Barat,” Jurnal Rekayasa Lingkungan Tropis, Vol. 2, No. 2, Pp. 1–10, 2020.

Q. R. Aliyah And B. Cahyadi, “Pemetaan Tingkat Kebisingan Pada Bengkel Pipa Dan Mess Karyawan I Dengan Metode Peta Kontur,” Prosding Semnastek, 2022.

F. Ahmad, I. D. Handayani, A. Margiantono, F. Teknik, And U. Semarang, “Analisis Tingkat Kebisingan Di Universitas Semarang Dengan Peta Kontur Menggunakan Software Golden 14 Surfer 14,” Journal Ilmiah Teknik Elektro, Vol. 10, no. 2, pp. 22–27, 2018.




DOI: https://doi.org/10.32672/jse.v8i4.6711

Refbacks

  • There are currently no refbacks.