Evaluasi Mutu Pada Proses Pengelasan Menggunakan Metode Old dan New Seven Tools di PT. XYZ

Dwi Putri Fajar, Deny Andesta

Abstract


In the service and manufacturing industry competition, companies need to maintain the quality of the products they produce. PT XYZ is a company engaged in steel fabrication work services. Fabrication work there is a sequence of production processes that must be maintained in quality, because the company must do the work with the standards set by the clients. One of the most influential production processes in quality control is the welding process. This study aims to evaluate the quality of the welding process of the cable tray support project consisting of four batches. The results of the study found six types of welding defects, namely porosity, incomplete fushion, over spatter, overlap, slag, and undercut. Based on the Pareto diagram, there are 2 types of welding defects that will be prioritized, namely porosity and over spatter. Furthermore, based on the results of processing the new seven tools, it can be seen that the most important factor causing defects is the Man factor because this factor is also closely related to the Methode factor. alternative improvements that will be prioritized first because they have the highest value are conducting training to the welder to the maximum, conducting stricter supervision by the welding supervisor to workers when welding, the welding supervisor conducts regular machine supervision, scheduling maintenance on the machine by quality control.


Keywords


quality control, old seven tools, new seven tools, defect, welding

Full Text:

PDF

References


Suseno and V. N. Darmayanti, “Analisis Pengendalian Kualitas Produk Dengan Menggunakan Metode Statistical Process Control (SPC) dan New Seven Tools Di PT Hari Mukti Teknik,” Jurnal Cakrawala Ilmiah, vol. 1, no. 6, pp. 1547–1558, 2022.

M. Wahdan Syifa Aunillah, M. Dian Kurniawan, and Hidayat, “Analisis Pengendalian Kualitas Produksi Batu Kumbung Menggunakan Metode Seven Tools (Studi Kasus : CV. Salsabilah Group),” Sigma Teknika, vol. 5, no. 1, pp. 30–38, 2022.

V. Devani and M. Oktaviany, “Usulan Peningkatan Kualitas Pulp Dengan Menggunakan Metode Seven Tools Dan New Seven Tools Di PT. IK,” AGROINTEK, vol. 15, no. 2, pp. 521–536, May 2021, doi: 10.21107/agrointek.v15i2.7166.

D. Diniaty and Sandi, “Analisis Kecacatan Produk Tiang Listrik Beton Menggunakan Metode Seven Tools dan New Seven Tools (Studi Kasus: PT. Kunango Jantan),” Jurnal Teknik Industri, vol. 2, no. 2, pp. 155–162, 2016.

T. P. Matondang and M. M. Ulkhaq, “Aplikasi Seven Tools untuk Mengurangi Cacat Produk White Body pada Mesin Roller,” Jurnal Sistem dan Manajemen Industri, vol. 2, no. 2, pp. 59–66, Dec. 2018, doi: 10.30656/jsmi.v2i2.681.

A. Merjani and I. Kamil, “Penerapan Metode Seven Tools dan PDCA (Plan Do Check Action) Untuk Megurangi Cacat Pengelasan Pipa,” Profisiensi, vol. 9, no. 1, pp. 124–131, 2021.

J. Radianza and I. Mashabai, “Analisa Pengendalian Kualitas Produksi Dengan Menggunakan Metode Seven Tools Quality Di PT. Borsya Cipta Communica,” JITSA Jurnal Industri & Teknologi Samawa, vol. 1, no. 1, pp. 17–21, 2020.

N. Hairiyah, R. R. Amalia, and N. Nuryati, “Pengendalian Kualitas Amplang Menggunakan Seven Tools Di UD. Kelompok Melati,” AGROINTEK, vol. 14, no. 2, pp. 249–257, Aug. 2020, doi: 10.21107/agrointek.v14i2.6055.

E. Haryanto and I. Novialis, “Analisis Pengendalian Kualitas Produk Bos Rotor Pada Proses Mesin CNC Lathe Dengan Metode Seven Tools,” Jurnal Teknik, vol. 8, no. 1, pp. 69–77, 2019.

A. E. Saputra and N. A. Mahbubah, “Analisis Seven Tools Pada Pengendalian Kualitas Proses Vulkanisir Ban 1000 Ring 20 Di CV Citra Buana Mandiri Surabaya,” STRING (Satuan Tulisan Riset dan Inovassi Teknologi), vol. 5, no. 3, pp. 252–262, 2021.

Y. Febria Suci, Y. Novia Nasution, and Arista Rizk, “Penggunaan Metode Seven New Quality Tools dan Metode DMAIC Six Sigma Pada Penerapan Pengendalian Kualitas Produk (Studi Kasus : Roti Durian Panglima Produksi PT. Panglima Roqiiqu Group Samarinda),” Jurnal EKSPONENSIAL, vol. 8, no. 1, pp. 27–36, 2017.

N. Aziza and F. B. Setiaji, “Pengendalian Kualitas Produk Mebel Dengan Pendekatan Metode New Seven Tools,” Teknika : Engineering and Sains Journal, vol. 4, no. 1, pp. 27–34, 2020.

S. D. A. Lafeniya and Suseno, “Pengendalian Kualitas Produk Kain Grey Dengan Metode New Seven Tools Pada PT Djohartex,” Jurnal Inovasi dan Kreativitas (JIKa), vol. 2, no. 2, pp. 46–56, Jan. 2023, doi: 10.30656/jika.v2i2.6003.

R. Prabowo and S. Wijaya, “Integrasi New Seven Tools dan TRIZ (Theory of Inventive Problem Solving) Untuk Pengendalian Kualitas Produk Kran,” Jurnal Teknik Industri, vol. 10, no. 1, pp. 22–30, 2020.

A. A. Amartya and N. A. Mahbubah, “Managing Quality of The Carton Box Production Process CV GGG Using New Seven Tools Method,” Serambi Engineering, vol. VII, no. 2, pp. 3011–3021, 2022.




DOI: https://doi.org/10.32672/jse.v8i4.6667

Refbacks

  • There are currently no refbacks.


Lisensi Creative Commons
Ciptaan disebarluaskan di bawah Lisensi Creative Commons Atribusi 4.0 Internasional.

 

 

RJI Main logo

Bekerjasama dengan Native Proofreading